HP LaserJet 1320 Manual

The printer control panel is comprised of four lights and two buttons. The hp LaserJet 1320 printer has an additional light at the top of the control panel. These lights produce patterns that identify your printer's status. Wireless light: (HP LaserJet 1320nw printer only) When the Wireless light is on solid, a wireless connection has been established. When the Wireless light is off, wireless operation is disabled. When the Wireless light is flashing, the printer is trying to establish a wireless connection. Toner light: When the toner is low, the Toner light is on solid. When the print cartridge is out of the printer, the Toner light is flashing. Attention light: Indicates printer media input tray is empty, print cartridge door is open, the print cartridge is missing, or other errors. See Printer information pages for more information. Ready light Indicates that the printer is ready to print. GO button and light: To print a demo page or to continue printing while in manual feed mode, press and release the GO button. To print a configuration page, press and hold the GO button for 5 seconds. CANCEL button: To cancel the print job that is currently printing, press the CANCEL button.

You should use the single-sheet priority input slot when feeding one sheet of paper, envelope, postcard, label, or transparency. You can also use the single-sheet priority input slot to print the first page on different media than the rest of the document. Media guides ensure that the media is correctly fed into the printer and that the print is not skewed (crooked on the media). When loading media, adjust the media guides to match the width of the media that you are using. The printer automatically prints from the single-sheet priority input slot before printing from the main input tray. See Choosing paper and other media for more information about media types. The enclosed main input tray, accessed from the front of the printer, holds up to 250 sheets of 20 lb paper or other media. The main input tray supports paper with the following specifications: Weight: Up to 60 to 105 g/m2 (16 to 28 lb.). Size: From 147 x 211 mm (5.8 x 8.27 inches) to 216 x 356 mm (8.5 x 14 inches). Media guides ensure that the media is correctly fed into the printer and that the print is not skewed (crooked on the media). The main input tray has both side and rear media guides. When loading media, adjust the media guides to match the length and width of the media that you are using.

The following sections describe the software that is provided with the HP LaserJet 1160 and HP LaserJet 1320 series printers. For easy printer setup and access to the full range of printer features, HP strongly recommends that you install the software provided. Not all software is available in all languages. Install the software before setting up the printer. See the Readme for the latest software information. The most recent drivers, additional drivers, and other software are available from the Internet and other sources. The printer comes with software for the following operating systems: Windows 98, Windows Me, Windows NT (printer driver only), Windows 2000, Windows Server 2003 (printer driver only) For more information about upgrading from Windows 2000 Server to Windows Server 2003, go to http://www.microsoft.com/. For more information about Windows Server 2003 Point and Print, go to http://www.microsoft.com/. For more information about Windows Server 2003 Terminal Services and Printing, go to http://www.microsoft.com/, Windows XP (32-bit), Windows XP (64-bit) (printer driver only), Mac OS 9.x (printer driver only), Mac OS X v10.1 (printer driver only), v10.2 and later.

HP LaserJet 1320 Manual

Tweet